Glossary entry (derived from question below)
English term or phrase:
Automatic bend
Swedish translation:
automatisk böjning; automatisk sväng
Added to glossary by
Ingemar Kinnmark
Jun 15, 2010 09:15
14 yrs ago
English term
Automatic bend
English to Swedish
Tech/Engineering
Automation & Robotics
CAD/CAM
Automatic bend
Proposed translations
(Swedish)
| 2 | automatisk sväng |
Ingemar Kinnmark
|
Change log
Jun 20, 2010 09:16: Ingemar Kinnmark Created KOG entry
Proposed translations
2 hrs
Ingemar Kinnmark
Native in Swedish
20 years in technical: 500,000+ words/yr
Native in: Swedish 
Works in: English to Swedish
Related KudoZ points
:
12
Selected
automatisk sväng
Se referens nedan.
--------------------------------------------------
Note added at 2 hrs (2010-06-15 11:27:56 GMT)
--------------------------------------------------
Från en handbok för automatisk styrning av jordbruksmaskiner:
...när fordonet utför en automatisk sväng.
Se: https://stellarsupport.deere.com/en_INT/pdfs/Swedish/OMPC217...
--------------------------------------------------
Note added at 3 hrs (2010-06-15 12:51:51 GMT)
--------------------------------------------------
I själva verket är nog "automatic bend" snarare ett alternativ i t.ex. CATIA.
Engelsk referens:
I made a sheet metal part in V5R3 by using Extrusion, Wall on Edge, etc. After that I made the Automatic bend and I am able to nicely Unfold the part.
Se: http://www.eng-tips.com/viewthread.cfm?qid=121199&page=125
--------------------------------------------------
Note added at 3 hrs (2010-06-15 12:53:39 GMT)
--------------------------------------------------
Med detta nya sammanhang kan "automatisk sväng" kanske fortfarande fungera. Ett bättre alternativ kan dock vara:
automatic bend
automatisk böjning
--------------------------------------------------
Note added at 2 hrs (2010-06-15 11:27:56 GMT)
--------------------------------------------------
Från en handbok för automatisk styrning av jordbruksmaskiner:
...när fordonet utför en automatisk sväng.
Se: https://stellarsupport.deere.com/en_INT/pdfs/Swedish/OMPC217...
--------------------------------------------------
Note added at 3 hrs (2010-06-15 12:51:51 GMT)
--------------------------------------------------
I själva verket är nog "automatic bend" snarare ett alternativ i t.ex. CATIA.
Engelsk referens:
I made a sheet metal part in V5R3 by using Extrusion, Wall on Edge, etc. After that I made the Automatic bend and I am able to nicely Unfold the part.
Se: http://www.eng-tips.com/viewthread.cfm?qid=121199&page=125
--------------------------------------------------
Note added at 3 hrs (2010-06-15 12:53:39 GMT)
--------------------------------------------------
Med detta nya sammanhang kan "automatisk sväng" kanske fortfarande fungera. Ett bättre alternativ kan dock vara:
automatic bend
automatisk böjning
4 KudoZ points awarded for this answer.
Something went wrong...