Dec 2, 2012 17:29
12 yrs ago
Swedish term
Sweden
Easy reading - Good writing
Native in: English 
, Swedish
Works in: Swedish to English
passförband
Swedish to English
Tech/Engineering
Construction / Civil Engineering
I en bro ska skruvförband i huvudkonstruktion utföras som passförband.
This is in a 'Teknisk beskrivning Anläggning Mark' for VV - a spec for constructing E4
Am not getting this one somehow - its in Eurocode 3, but where?
This is in a 'Teknisk beskrivning Anläggning Mark' for VV - a spec for constructing E4
Am not getting this one somehow - its in Eurocode 3, but where?
Proposed translations
(English)
| 4 +1 | close-tolerance joint |
George Hopkins
|
| 4 | tight fit bolted connection |
asptech
|
| 3 | conical bolting |
Charles Ek
|
| 3 | interference fit |
Kristian Andersson
|
Proposed translations
+1
5 hrs
Selected
close-tolerance joint
TNC Byggtekniskt lexikon
--------------------------------------------------
Note added at 16 hrs (2012-12-03 09:36:40 GMT)
--------------------------------------------------
Or: close-tolerance fit if it fits the context better...
--------------------------------------------------
Note added at 16 hrs (2012-12-03 09:36:40 GMT)
--------------------------------------------------
Or: close-tolerance fit if it fits the context better...
Note from asker:
| Thanks George, went with your asnwer! It also fit the context best. /D |
4 KudoZ points awarded for this answer.
Comment: "Tough call, as this didn't come up with the EN"
24 mins
Charles Ek
United States
United States
Native in English
Works in field
United States
Your meaning, from your words and mine
Native in: English 
Works in: Norwegian to English, Danish to English, Swedish to English, and 2 more.
Related KudoZ points
:
68
conical bolting
I haven't "connected" all the dots (sorry for the pun), but I think Siemens probably knows what this is called in English. Compare the Swedish and English versions at the respective links.
Reference:
Note from asker:
| Thanks for the fast answer! It is looking good so far... |
| Thanks again, this was a tough call, it was a pretty tricky term! |
56 mins
Kristian Andersson
Native in Swedish
&
English
Specializes in field
Experienced technical translator!
Native in: English , Swedish
Works in: English to Swedish
Related KudoZ points
:
32
interference fit
"Med en snabb utveckling inom flygplansteknologin och behovet av att reparera aluminium och komposit strukturer är ofta användningen av ***interferance fit (passförband)*** önskvärd i områden utsatta för hög utmattning. Monogram's Radial-Lok® möter dessa önskemål och är det ända fästelement i dess slag som motsvarar detta och som uppnår full radiell expansion i ett frigångshål."
http://www.bufab.com/bix/OurProducts/Products/Rivets/Aerospa...
"An interference fit, also known as a press fit or friction fit,[1] is a fastening between two parts which is achieved by friction after the parts are pushed together, rather than by any other means of fastening."
http://en.wikipedia.org/wiki/Interference_fit
http://www.bufab.com/bix/OurProducts/Products/Rivets/Aerospa...
"An interference fit, also known as a press fit or friction fit,[1] is a fastening between two parts which is achieved by friction after the parts are pushed together, rather than by any other means of fastening."
http://en.wikipedia.org/wiki/Interference_fit
Note from asker:
| Thanks for the answer! I went with George's anwer after looking thru these more. |
1 day 1 hr
tight fit bolted connection
Normally, holes in structural parts that are to be joined by bolting are drilled with a diameter that is 1-2 mm larger than the bolt shank diameter. If no slip of the connection can be tolerated, the diameter of the holes must be less than 0,5 mm larger than the bolt shank.
Note from asker:
| Thanks for the answer! Already handed in the work, tho... |
Something went wrong...