Glossary entry (derived from question below)
English term or phrase:
premounted step shank fastener
French translation:
attache prémontée avec tige à épaulement
English term
premounted step shank fastener
Ceiling clip with 1 inch premounted step shank fastener
Thanks
Manon
4 +1 | attache prémontée avec tige à épaulement | FX Fraipont (X) |
Jun 10, 2011 06:18: Stéphanie Soudais (X) changed "Level" from "Non-PRO" to "PRO"
PRO (3): Hélène Curtis, FX Fraipont (X), Stéphanie Soudais (X)
Non-PRO (1): GILLES MEUNIER
When entering new questions, KudoZ askers are given an opportunity* to classify the difficulty of their questions as 'easy' or 'pro'. If you feel a question marked 'easy' should actually be marked 'pro', and if you have earned more than 20 KudoZ points, you can click the "Vote PRO" button to recommend that change.
How to tell the difference between "easy" and "pro" questions:
An easy question is one that any bilingual person would be able to answer correctly. (Or in the case of monolingual questions, an easy question is one that any native speaker of the language would be able to answer correctly.)
A pro question is anything else... in other words, any question that requires knowledge or skills that are specialized (even slightly).
Another way to think of the difficulty levels is this: an easy question is one that deals with everyday conversation. A pro question is anything else.
When deciding between easy and pro, err on the side of pro. Most questions will be pro.
* Note: non-member askers are not given the option of entering 'pro' questions; the only way for their questions to be classified as 'pro' is for a ProZ.com member or members to re-classify it.
Proposed translations
attache prémontée avec tige à épaulement
stepped shank = la tige a deux diamètres différents
"3.1.3 Stepped Shank Fasteners: The stepped shank
fasteners have shank diameters of 0.145 inch (3.7 mm)
and 0.102 inch (2.6 mm), and a 0.25-inch (6.4 mm) head
diameter. The fasteners are supplied collated into plastic
strips and have a minimum 0.0002-inch (5 μm) zinc plating
per ASTM B 633."
http://www.icc-es.org/reports/pdf_files/ICC-ES/ESR-2249.pdf
"DX 35 attaches à plafond (combo de calibre .25
Attache seule avec clous préinstallés (.25 calibre combo) comprenant clous et cartouches emballés séparément"
http://www.hilti.ca/holca/page/module/product/prca_catnaviga...
"DX 35 (.25 caliber combo)
Pre-mounted ceiling clips with pre-tied wires with .25 caliber cartridges.
http://www.hilti.ca/holca/page/module/product/prca_rangedeta...
Discussion